Aerox problems

bibby14 · 27-01-2008, 17:46

i bought a giannelli exhaust i have fitted lightweight rollers and stiff clutch springs, but it is still lacking power ????? any suggestions

Zumaman · 27-01-2008, 18:30

Please list ALL of your mods, what you weigh, what gram rollers you are using, and what clutch springs. It is hard to help without that info.
Thanks,

bibby14 · 28-01-2008, 18:55

the scooter weighs 97kg, i have 3.5 gram rollers in, and very hard clutch springs.(Red) the exhuast i have put on is a gennelli

BOOST YA SCOOT · 28-01-2008, 21:50

Quote:

Originally Posted by bibby14

the scooter weighs 97kg, i have 3.5 gram rollers in, and very hard clutch springs.(Red) the exhuast i have put on is a gennelli

hi mate

the rollers seem a little light for the road

and the clutch spring is way to hard, that is not std 50cc

i would get some heavier rollers and a softer clutch spring

are you using the standard clutch if so try the standard springs

Cheers BYS '08'

bibby14 · 28-01-2008, 22:08

hmmm... but i have fit the rollers advised when i bought it

BOOST YA SCOOT · 29-01-2008, 19:36

Quote:

Originally Posted by bibby14

hmmm... but i have fit the rollers advised when i bought it

hi mate

yer ok you fitted the rollers as u were advised. but the roller and clutch set-up is not right

the 3.5g rollers is what they you in the 7t engines not the standard 50

just a little bit of advise

cheers BYS '08' (uk)

bibby14 · 29-01-2008, 19:42

orite i didn't realise, well i can only get 4.2 rollers wot clutch springs do you reklon just hard (yellow)

bibby14 · 29-01-2008, 19:43

also do u rekon its worth fitting new main jet??? i have been told you should make a 5% increase of size when fitting performance exhausts

BOOST YA SCOOT · 29-01-2008, 19:54

Quote:

Originally Posted by bibby14

orite i didn't realise, well i can only get 4.2 rollers wot clutch springs do you reklon just hard (yellow)

Hi mate

you can buy differnet wieght rollers from boost ya scoot

and the clutch spring i would try the standard ones at frist

and yes i would up get one.... wot carb have you got (delorto 12mm)

Cheers BYS '08'

P.s you can get all parts from boost ya scoot

bibby14 · 29-01-2008, 19:57

well its for ma mbk nitro i put aerox cos i thought ppl would look lol some1 told me that there 68somet lyk that but id ont really kno

BOOST YA SCOOT · 29-01-2008, 20:32

Quote:

Originally Posted by bibby14

well its for ma mbk nitro i put aerox cos i thought ppl would look lol some1 told me that there 68somet lyk that but id ont really kno

hi mate

the nitro and aerox is the same doesn't make much difference

the 68 sounds like the main jet. if it is i would up jet to a 70

all you need to do is take the flot bowl off andcheck the jet size

cheers BYS '08'

bibby14 · 29-01-2008, 22:56

this is gonna sound a stupid question to you but where abouts on the scooter is this am only 15 its ma first scooter

bibby14 · 29-01-2008, 22:57

also i need the thread size 5mm or 6mm ????

BOOST YA SCOOT · 31-01-2008, 17:44

Quote:

Originally Posted by bibby14

also i need the thread size 5mm or 6mm ????

hi mate

the carb is locacted here

behind the air box

the jet should have the size printed on it (maybe small)
and the size m5 or m6 you will need to measure with a ruler

Cheers BYS '08'

bibby14 · 31-01-2008, 20:20

i have checked the jet it says 86 on it does that seem rite 2 u?? n wot shud i up it to 88- 90

jackariusjones · 25-08-2008, 02:19

Quote:

Originally Posted by bibby14

i bought a giannelli exhaust i have fitted lightweight rollers and stiff clutch springs, but it is still lacking power ????? any suggestions

im having the exact same problems, i put a gianelli race pipe on my aerox, changed to 4gram rollers(i didnt like them so went back to standard 6's), changed clutch springs to harder(red), i tried upjetting from the standard 86 to a 93 and it was choking up, then i tried to go just to an 88 and it was still choking, anybody know what to do..? cheers

Justkillit · 25-08-2008, 16:12

I would think 80 is absolute max with only a exhaust. With a yazuni z on a friends neos 78 seemed to work the best and with a race air filter 82 was spot on.

jackariusjones · 25-08-2008, 17:35

Quote:

Originally Posted by Justkillit

I would think 80 is absolute max with only a exhaust. With a yazuni z on a friends neos 78 seemed to work the best and with a race air filter 82 was spot on.

so basically i need a K&N filter for it..? and the older aerox's standard jet was a 86, much bigger than the newer ones,

27-01-2008, 17:46	#1 (permalink)
bibby14 Registered User	Aerox problems i bought a giannelli exhaust i have fitted lightweight rollers and stiff clutch springs, but it is still lacking power ????? any suggestions

27-01-2008, 18:30	#2 (permalink)
Zumaman 2005 Aerox Zuma	Please list ALL of your mods, what you weigh, what gram rollers you are using, and what clutch springs. It is hard to help without that info. Thanks,

28-01-2008, 18:55	#3 (permalink)
bibby14 Registered User	the scooter weighs 97kg, i have 3.5 gram rollers in, and very hard clutch springs.(Red) the exhuast i have put on is a gennelli

28-01-2008, 22:08	#5 (permalink)
bibby14 Registered User	hmmm... but i have fit the rollers advised when i bought it

29-01-2008, 19:42	#7 (permalink)
bibby14 Registered User	orite i didn't realise, well i can only get 4.2 rollers wot clutch springs do you reklon just hard (yellow)

29-01-2008, 19:43	#8 (permalink)
bibby14 Registered User	also do u rekon its worth fitting new main jet??? i have been told you should make a 5% increase of size when fitting performance exhausts

29-01-2008, 19:57	#10 (permalink)
bibby14 Registered User	well its for ma mbk nitro i put aerox cos i thought ppl would look lol some1 told me that there 68somet lyk that but id ont really kno

29-01-2008, 22:56	#12 (permalink)
bibby14 Registered User	this is gonna sound a stupid question to you but where abouts on the scooter is this am only 15 its ma first scooter

29-01-2008, 22:57	#13 (permalink)
bibby14 Registered User	also i need the thread size 5mm or 6mm ????

31-01-2008, 20:20	#15 (permalink)
bibby14 Registered User	i have checked the jet it says 86 on it does that seem rite 2 u?? n wot shud i up it to 88- 90

25-08-2008, 16:12	#17 (permalink)
Justkillit Registered User	I would think 80 is absolute max with only a exhaust. With a yazuni z on a friends neos 78 seemed to work the best and with a race air filter 82 was spot on.