help me please

Tom91 · 01-08-2008, 02:42

how do i set up my squish hight for a stage 6 racing cylinder on a piaggio enigne and allso how do i know what to set it to if you could help me that wud be great thank tom

r3ar_vi3w · 01-08-2008, 10:20

first tell us is your cyl. head made of two piece ? and if it is you can put some gaskets under the head and measure the squish

Tom91 · 01-08-2008, 11:51

yea its the modular 2 piece head what shud i set the squish hight to would 0.6mm be ok ? thanks very much for you help

JRMN · 01-08-2008, 12:39

take a little piece of tin metalmake the form like a "L"

so you put in to your cilinder and just kick once

and take the distance of it with a marking gauge

Do it a couple times so you know what the averages squish is.
[COLOR=maroon][/COLOR]

Tom91 · 03-08-2008, 23:02

ok thanks for the information i will try that but if eney 1 els could give me some more information on how to set it up or at what height to set it at that would be great thanks Tom

Tom91 · 05-08-2008, 16:31

hey
my cylinder kit come with 1 paper base gasket snd 4 metal these are diffrent thickness do i measure the squish height with just the paper gasket on then add the number of metal one's needed ? if eney 1 could get back to me with some information about this that would be great thanks Tom

01-08-2008, 02:42	#1 (permalink)
Tom91 Registered User	help me please how do i set up my squish hight for a stage 6 racing cylinder on a piaggio enigne and allso how do i know what to set it to if you could help me that wud be great thank tom

01-08-2008, 10:20	#2 (permalink)
r3ar_vi3w Registered User	first tell us is your cyl. head made of two piece ? and if it is you can put some gaskets under the head and measure the squish

01-08-2008, 11:51	#3 (permalink)
Tom91 Registered User	yea its the modular 2 piece head what shud i set the squish hight to would 0.6mm be ok ? thanks very much for you help

01-08-2008, 12:39	#4 (permalink)
JRMN JRMN	take a little piece of tin metalmake the form like a "L" so you put in to your cilinder and just kick once and take the distance of it with a marking gauge Do it a couple times so you know what the averages squish is. [COLOR=maroon][/COLOR]

03-08-2008, 23:02	#5 (permalink)
Tom91 Registered User	ok thanks for the information i will try that but if eney 1 els could give me some more information on how to set it up or at what height to set it at that would be great thanks Tom

05-08-2008, 16:31	#6 (permalink)
Tom91 Registered User	hey my cylinder kit come with 1 paper base gasket snd 4 metal these are diffrent thickness do i measure the squish height with just the paper gasket on then add the number of metal one's needed ? if eney 1 could get back to me with some information about this that would be great thanks Tom