KickassTuning Cpi Oliver

Kickass · 27-10-2007, 15:24

Hello!
I'm from Estonia (little country near Finland)

During winter 2006/2007 i thought it's right time to make little project. Nobody had done good project of Cpi so far in my little home country. In summer 2006 i put Tecnigas Next-R chrome exhaust, Malossi Multivar and all kind of springs and stuff. So as you understand i'm not very fast guy

Main for me was the looks.
Well i put some pics too:

Autumn 2006:

And work starts. First i changed this:

Some little parts were painted with spray

And little fibre

My Koso speedo

And then painted. Orange is Lamborghini colour and white is Yamaha's

Well, i know it's nothing compareing to other scooters on this site but it's something in our country. Hope you like.

Kickass

Kickass · 27-10-2007, 15:24

Sorry but how i can change links to pictures??

BOOST YA SCOOT · 27-10-2007, 15:35

Hi mate

nice looking project you have here, was the speedo easy to fit and did the fuel gauge work

to change the pictures make an account with www.photobucket.com and down load all your picture

you then open the pictures and copy-paste

this will make your project page look very very intresting

check out my projects

BYS NRG

BYS slider

BYS aerox (ROSSI ROX)

(BYS) Zip-N8RO

the NRG has got the same speedo as you but i am now chaging them

Cheers

BYS

BOOST YA SCOOT · 27-10-2007, 15:50

Hi dude

i have up loaded the pictures into my photobucket sccount

here they are

hope this is ok

if you delet the links and copy and paste these in

Kickass · 27-10-2007, 16:16

Thanks

Koso is working well. Fuel gauge is working and it shows temperature of air outside not engine because its aircooled. Rpm meter is working well to. I'm very pleased with this speedo. Fitting was quite easy, just little work with brain and it works

BOOST YA SCOOT · 27-10-2007, 17:08

Quote:

Originally Posted by Kickass

Thanks

Koso is working well. Fuel gauge is working and it shows temperature of air outside not engine because its aircooled. Rpm meter is working well to. I'm very pleased with this speedo. Fitting was quite easy, just little work with brain and it works

Hi mate

the koso on my nrg was working ok but we could not get the fuel gauge to work. we think it is the fuel senser within the petrol tank

the other parts on my speedo worked very well and it looks very nice, ,my nrg was a little hard but like you send a little work with my brain and it work

i have now changed my speedo to the stage 6 little one with handle risers

hope you liked my projects

cheers
BYS

newstb · 27-10-2007, 17:32

nice that here is somobody from estonia

nice scoot

Symster · 27-10-2007, 19:54

I'm too from Estonia and i have to tell you that this project is very famous in estonia

scootertrog · 28-10-2007, 01:24

Looks nice - how did you paint the scoot, rattlecan or traditional spray-gun?

scootertrog

Peter_Jog · 28-10-2007, 03:14

Grtz! Nice Tuned!

rydah · 28-10-2007, 03:26

your bike turned out really nice. i think you should put on some aprillia 13" wheels to complete it.

[5th] Douwe · 28-10-2007, 04:14

Quote:

Originally Posted by Kickass

Well, i know it's nothing compareing to other scooters on this site but it's something in our country. Hope you like.

Kickass

nice scoot,

tuning is not about having the most expensive and fastest parts but about making your scooter the way you want it, i think as said before 13'' aprilia wheel's (white maybe) would look good on it.

nice work on the poly stuf

greetz, douwe

Kickass · 28-10-2007, 20:45

This project is finished, i dont want to do anything with it anymore, scooter is for sale
But i'm building Aprilia Sr www now, maybe i'll do new thread to soon.

Replica Rox · 29-10-2007, 18:01

Yeah , CPI is very nice , but put SR's 13'' wheels . And show us your Sr www project to .

Greetz

Dragspert · 12-11-2007, 20:16

Nice CPI. nobody in holland want to tune it...only aerox over here

I think it's a real nice machine and I hope it't getting usefull over here to customize some CPI's in the same style.

Open a new thread for your SR

(Dog is still alive i see

)

succes with your new project!

27-10-2007, 15:24	#1 (permalink)
Kickass Registered User	KickassTuning Cpi Oliver Hello! I'm from Estonia (little country near Finland) During winter 2006/2007 i thought it's right time to make little project. Nobody had done good project of Cpi so far in my little home country. In summer 2006 i put Tecnigas Next-R chrome exhaust, Malossi Multivar and all kind of springs and stuff. So as you understand i'm not very fast guy Main for me was the looks. Well i put some pics too: Autumn 2006: And work starts. First i changed this: Some little parts were painted with spray And little fibre My Koso speedo And then painted. Orange is Lamborghini colour and white is Yamaha's Well, i know it's nothing compareing to other scooters on this site but it's something in our country. Hope you like. Kickass Last edited by Kickass; 27-10-2007 at 16:24.

27-10-2007, 15:35	#3 (permalink)
BOOST YA SCOOT Registered User My scooter: ScooterbaseID	Hi mate nice looking project you have here, was the speedo easy to fit and did the fuel gauge work to change the pictures make an account with www.photobucket.com and down load all your picture you then open the pictures and copy-paste this will make your project page look very very intresting check out my projects BYS NRG BYS slider BYS aerox (ROSSI ROX) (BYS) Zip-N8RO the NRG has got the same speedo as you but i am now chaging them Cheers BYS __________________ -----UK HARD CORE SCOOTER TUNING PARTS----- ----------WWW.BOOSTYASCOOT.CO.UK---------

27-10-2007, 15:50	#4 (permalink)
BOOST YA SCOOT Registered User My scooter: ScooterbaseID	Hi dude i have up loaded the pictures into my photobucket sccount here they are hope this is ok if you delet the links and copy and paste these in __________________ -----UK HARD CORE SCOOTER TUNING PARTS----- ----------WWW.BOOSTYASCOOT.CO.UK---------

28-10-2007, 03:14	#10 (permalink)
Peter_Jog Registered User	Grtz! Nice Tuned! __________________ vertical jog, 201m > 10,121 sec

12-11-2007, 20:16	#15 (permalink)
Dragspert Bob, maar nu #13	Nice CPI. nobody in holland want to tune it...only aerox over here I think it's a real nice machine and I hope it't getting usefull over here to customize some CPI's in the same style. Open a new thread for your SR (Dog is still alive i see) succes with your new project! __________________ Bob: Ik mag zoveel zeggen, maar als paul iets zegt is iedereen kwaad!? Geartsje: Ja, maar paul is een eikel:) Bob: OMG:D

27-10-2007, 15:24	#2 (permalink)
Kickass Registered User	Sorry but how i can change links to pictures??

27-10-2007, 16:16	#5 (permalink)
Kickass Registered User	Thanks Koso is working well. Fuel gauge is working and it shows temperature of air outside not engine because its aircooled. Rpm meter is working well to. I'm very pleased with this speedo. Fitting was quite easy, just little work with brain and it works

27-10-2007, 17:32	#7 (permalink)
newstb Registered User	nice that here is somobody from estonia nice scoot

27-10-2007, 19:54	#8 (permalink)
Symster Registered User	I'm too from Estonia and i have to tell you that this project is very famous in estonia

28-10-2007, 01:24	#9 (permalink)
scootertrog Missouri, USA	Looks nice - how did you paint the scoot, rattlecan or traditional spray-gun? scootertrog

28-10-2007, 03:26	#11 (permalink)
rydah Registered User	your bike turned out really nice. i think you should put on some aprillia 13" wheels to complete it.

28-10-2007, 20:45	#13 (permalink)
Kickass Registered User	This project is finished, i dont want to do anything with it anymore, scooter is for sale But i'm building Aprilia Sr www now, maybe i'll do new thread to soon.

29-10-2007, 18:01	#14 (permalink)
Replica Rox Registered User	Yeah , CPI is very nice , but put SR's 13'' wheels . And show us your Sr www project to . Greetz