Killerteam Racing - Fiberglass Sr - Page 3

Petrik. · 31-03-2007, 00:08

when your setting up your variator, you do the same thing...same principle

butch-182 · 16-04-2007, 18:49

Well its been a while since ive updated, Theres been progress but have not been working on bike too much of late due to work etc..

Half way there, still need new bodypanel (front) buying paint etc....Well heres a couple of pics:

Some vids on youtube already, keyword: killerteam. Not great vids but got some better ones soon.

Enjoy!

Sosa. · 17-04-2007, 07:06

nice project ! another mad sr

xzburnoutzx · 17-04-2007, 21:46

Baaaaaad

What cooling are you using?

Sorry about the tripple post spam. My computer malfunctioned.

butch-182 · 21-04-2007, 20:16

Liquid cooled, one sr rad and one nrg radiator provides the perfect operating temp. Update this coming week, few differences etc. Ill try to get some more vids next weekend, couldnt get any today unfortunatly!
The bikes looking pretty bad at the moment, just sorting a new front panel then the spraying can begin. Still lots of work left but the pics show how it currently stands =)

Liam

quicksand · 22-04-2007, 16:26

liam nice to see more progress, been quite a while keep it uP!!!!
hopefully il come soon to c it

butch-182 · 02-05-2007, 09:23

Second rear body party fiberglassed:

Still awaiting the new frontpanal!

quicksand · 02-05-2007, 22:59

VERY nice ass it has

just need to do the front and paint and ur done

Tommy. · 04-05-2007, 16:27

completely lower that front end! this looks a bit strange..

like that backpanel...curious how it'll look like with the seat mounted

grtz Ken

butch-182 · 04-05-2007, 18:46

The front end is going to be lowered, I have 2 sets of forks so was just getting them set up. For the backpanal I have a custom made peice + Seat, ill try and post pics tomorrow if I got time. Had to spend time taking the engine off which has held me back on progress due to the bad quality of the stage6 reeds, So will be replacing those with carbon ones hopefully this weekend.

butch-182 · 09-05-2007, 20:07

Managed to get lots sorted out this week. After coming back from the Andalucia race meet at the weekend, I had to start getting things prepared for the next race. ( ill post some pics & vids soon ) More or less everything is primed now and ready for paint, Some new pics :

I also put the seat on now so you can see how low the posision is, perfect for race. I will get some videos pretty soon as everythings a little busy atm with moving. = )

san2 · 09-05-2007, 20:57

that postion i think wil be quite hard for racing, ull slip of that seat, lower the back abit and the front alot, then put abit lower handle bars, that bend stlightly to the inside (not as much as ur other ones xD) and ull be perfect... i see u with future borat boy ;P!!!! and also 12" rims wudnt be too bad, keep it up!

butch-182 · 09-05-2007, 21:19

The old rear bar was cut off (from the rear) but if i remeber correctly the suspension is about 1" shorter than the original, so for sure the back is low enough, just looks high because of the rear panal. The seat is real comfortable, pretty perfect to sit on also. Small seat also aids to weight reduction. Still have to get the front lowered, just needing to test a few other things then the front will be done.

apriliafan · 09-05-2007, 21:23

san 2,thinking is good,knowing is better,i guess liam knows what he is doing,and if he says its perfect for race,its gonna be it also cuz it depends on ur height etc.
u got to find ur style and position and everybody ride it diffrent.same with the handlebars.
btw, Killerteam is still learning ,and u got to make misstakes to learn of it,as everybody else in the community right san2?

san2 · 13-05-2007, 02:36

ye i was just giving my opinion, ofcourse i know liam knows... i mean, he's pro

**Razma** · 13-05-2007, 08:40

I hope you are planning to mount more bodywork

VST · 16-05-2007, 18:29

ass looks like an area 51 @ the 2nd picture

butch-182 · 17-05-2007, 18:23

Hello,

Yes there will be all body parts mounted eventually, I just have to find some time to get the front panal, which is holding me back. I will post an update this weekend. =)

Thanks all

butch-182 · 18-05-2007, 18:25

Finished the painting last night, Got some other parts to finish off, Not great pic but just a sneak peak of what it will look like, dispite the front panal ruins it!

Enjoy! Thanks again =)

Liam

apriliafan · 18-05-2007, 20:54

oh liam
havent heart long time from u?
lost the contact a bit :-(
got to write it here,cuz there is no other way.

it looks nice the paint.keep going and get that front panel XD

VST · 20-05-2007, 16:31

you realy need to lower the front

apriliafan · 18-11-2007, 20:45

is that project still existing or its dead?

Sosa. · 19-11-2007, 11:20

nice paint jobz , keep up the good works

-

butch-182 · 26-11-2007, 19:34

Still here...STILL waiting on front panal. Ill try and get some latest pics soon.
Been busy with work so little time on bike. New solid subframe, rpm counter, bars, custom stem, rad, & ´lick o paint..

Taster pic :

butch-182 · 20-06-2008, 22:56

Long time since I last updated, I have moved houses so its been hard to work on the project, but there will be a huge update soon ready for the S.A weekend, Looking forward to see who is going from the forum too. watch this space! Update soon!

Enjoy!

YouTube - Killerteam the movie trailer

YouTube - Killerteam powerwheelie - summer 07

YouTube - Killerteam powerwheelie 2 - summer 07

apriliafan · 23-06-2008, 22:50

SA WEEKEND IS COMING!!!!!!!!!!!!!!!!!!!!!

i cant fucking wait mate,its going to be so fucking awesome.

why u dont represent ur new ideas here?
ur new inspirations ;-)

Blitz_sr · 20-08-2008, 09:46

wait i thought you moved to england? or did i get that wrong? how are you getting your bike over to germany or where ever?

16-04-2007, 18:49	#62 (permalink)
butch-182 Killerteam Racing	Well its been a while since ive updated, Theres been progress but have not been working on bike too much of late due to work etc.. Half way there, still need new bodypanel (front) buying paint etc....Well heres a couple of pics: Some vids on youtube already, keyword: killerteam. Not great vids but got some better ones soon. Enjoy! __________________ Team 7t Fiberglass sr KillerTeam Racing

17-04-2007, 21:46	#64 (permalink)
xzburnoutzx Italjet Dragster	Baaaaaad What cooling are you using? Sorry about the tripple post spam. My computer malfunctioned. Last edited by xzburnoutzx; 18-04-2007 at 06:09.

21-04-2007, 20:16	#65 (permalink)
butch-182 Killerteam Racing	Liquid cooled, one sr rad and one nrg radiator provides the perfect operating temp. Update this coming week, few differences etc. Ill try to get some more vids next weekend, couldnt get any today unfortunatly! The bikes looking pretty bad at the moment, just sorting a new front panel then the spraying can begin. Still lots of work left but the pics show how it currently stands =) Liam __________________ Team 7t Fiberglass sr KillerTeam Racing

22-04-2007, 16:26	#66 (permalink)
quicksand Registered User	liam nice to see more progress, been quite a while keep it uP!!!! hopefully il come soon to c it __________________ Double aerox project with Mr.Aerox: comming soon

02-05-2007, 09:23	#67 (permalink)
butch-182 Killerteam Racing	Second rear body party fiberglassed: Still awaiting the new frontpanal! __________________ Team 7t Fiberglass sr KillerTeam Racing

31-03-2007, 00:08	#61 (permalink)
Petrik. Patrick.	when your setting up your variator, you do the same thing...same principle

17-04-2007, 07:06	#63 (permalink)
Sosa. MHR ZIPPOR	nice project ! another mad sr

02-05-2007, 22:59	#68 (permalink)
quicksand Registered User	VERY nice ass it has just need to do the front and paint and ur done __________________ Double aerox project with Mr.Aerox: comming soon

04-05-2007, 16:27	#69 (permalink)
Tommy. Hagelslag My scooter: ScooterbaseID	completely lower that front end! this looks a bit strange.. like that backpanel...curious how it'll look like with the seat mounted grtz Ken __________________ Let me show u my pokermans!

04-05-2007, 18:46	#70 (permalink)
butch-182 Killerteam Racing	The front end is going to be lowered, I have 2 sets of forks so was just getting them set up. For the backpanal I have a custom made peice + Seat, ill try and post pics tomorrow if I got time. Had to spend time taking the engine off which has held me back on progress due to the bad quality of the stage6 reeds, So will be replacing those with carbon ones hopefully this weekend. __________________ Team 7t Fiberglass sr KillerTeam Racing

09-05-2007, 20:07	#71 (permalink)
butch-182 Killerteam Racing	Managed to get lots sorted out this week. After coming back from the Andalucia race meet at the weekend, I had to start getting things prepared for the next race. ( ill post some pics & vids soon ) More or less everything is primed now and ready for paint, Some new pics : I also put the seat on now so you can see how low the posision is, perfect for race. I will get some videos pretty soon as everythings a little busy atm with moving. = ) __________________ Team 7t Fiberglass sr KillerTeam Racing Last edited by butch-182; 18-05-2007 at 18:26.

09-05-2007, 20:57	#72 (permalink)
san2 Registered User	that postion i think wil be quite hard for racing, ull slip of that seat, lower the back abit and the front alot, then put abit lower handle bars, that bend stlightly to the inside (not as much as ur other ones xD) and ull be perfect... i see u with future borat boy ;P!!!! and also 12" rims wudnt be too bad, keep it up! Last edited by san2; 09-05-2007 at 20:59. Reason: forgot a thing

09-05-2007, 21:19	#73 (permalink)
butch-182 Killerteam Racing	The old rear bar was cut off (from the rear) but if i remeber correctly the suspension is about 1" shorter than the original, so for sure the back is low enough, just looks high because of the rear panal. The seat is real comfortable, pretty perfect to sit on also. Small seat also aids to weight reduction. Still have to get the front lowered, just needing to test a few other things then the front will be done. __________________ Team 7t Fiberglass sr KillerTeam Racing

09-05-2007, 21:23	#74 (permalink)
apriliafan Registered User	san 2,thinking is good,knowing is better,i guess liam knows what he is doing,and if he says its perfect for race,its gonna be it also cuz it depends on ur height etc. u got to find ur style and position and everybody ride it diffrent.same with the handlebars. btw, Killerteam is still learning ,and u got to make misstakes to learn of it,as everybody else in the community right san2?

13-05-2007, 02:36	#75 (permalink)
san2 Registered User	ye i was just giving my opinion, ofcourse i know liam knows... i mean, he's pro Last edited by san2; 13-05-2007 at 18:25.

16-05-2007, 18:29	#77 (permalink)
VST VST Tuner	ass looks like an area 51 @ the 2nd picture __________________ Verweijen Scooter Tuning, voor info PM VST 7T AC 86cc vlinder+fluiters in bewerkingsfase VST Evo AC 70cc slider @ 19.9pk doel: 21+SAE

20-05-2007, 16:31	#81 (permalink)
VST VST Tuner	you realy need to lower the front __________________ Verweijen Scooter Tuning, voor info PM VST 7T AC 86cc vlinder+fluiters in bewerkingsfase VST Evo AC 70cc slider @ 19.9pk doel: 21+SAE

13-05-2007, 08:40	#76 (permalink)
Razma ST.net tiepert...	I hope you are planning to mount more bodywork __________________ www.stickerspersms.nl

17-05-2007, 18:23	#78 (permalink)
butch-182 Killerteam Racing	Hello, Yes there will be all body parts mounted eventually, I just have to find some time to get the front panal, which is holding me back. I will post an update this weekend. =) Thanks all __________________ Team 7t Fiberglass sr KillerTeam Racing

18-05-2007, 18:25	#79 (permalink)
butch-182 Killerteam Racing	Finished the painting last night, Got some other parts to finish off, Not great pic but just a sneak peak of what it will look like, dispite the front panal ruins it! Enjoy! Thanks again =) Liam __________________ Team 7t Fiberglass sr KillerTeam Racing

18-05-2007, 20:54	#80 (permalink)
apriliafan Registered User	d oh liam havent heart long time from u? lost the contact a bit :-( got to write it here,cuz there is no other way. it looks nice the paint.keep going and get that front panel XD Last edited by apriliafan; 19-05-2007 at 20:47.

18-11-2007, 20:45	#82 (permalink)
apriliafan Registered User	is that project still existing or its dead?

19-11-2007, 11:20	#83 (permalink)
Sosa. MHR ZIPPOR	nice paint jobz , keep up the good works - __________________ "He who is deaf, blind & silent, lives a thousand years in peace."-John Gotti

26-11-2007, 19:34	#84 (permalink)
butch-182 Killerteam Racing	Still here...STILL waiting on front panal. Ill try and get some latest pics soon. Been busy with work so little time on bike. New solid subframe, rpm counter, bars, custom stem, rad, & ´lick o paint.. Taster pic : __________________ Team 7t Fiberglass sr KillerTeam Racing

23-06-2008, 22:50	#86 (permalink)
apriliafan Registered User	SA WEEKEND IS COMING!!!!!!!!!!!!!!!!!!!!! i cant fucking wait mate,its going to be so fucking awesome. why u dont represent ur new ideas here? ur new inspirations ;-) __________________ *******Killerteam Racing******* youtube.com --> Killerteam

20-08-2008, 09:46	#87 (permalink)
Blitz_sr Registered User	wait i thought you moved to england? or did i get that wrong? how are you getting your bike over to germany or where ever?

20-08-2008, 09:50	#88 (permalink)
butch-182 Killerteam Racing