ReleX XSH Evolution Aerox - Page 2

cunoh · 18-09-2006, 23:38

and wtf is this? Prins Claus tjoening?

Mark Jonker · 19-09-2006, 18:10

OMFG. that's after "tuning" ?.

Zmod · 20-09-2006, 14:44

Quote:

Originally Posted by Mark Jonker

OMFG. that's after "tuning" ?.

Yes they recieved a cylinder with shortned cylinder skirt. So they took down the piston after the cylinder. About the Boost port it isn't as rough as it looks.

Wesley S. · 25-09-2006, 20:03

Jeeez. what the.. your cil..

RR#1 · 27-09-2006, 17:09

Snyggt !

Rik491 · 28-09-2006, 13:21

Beunerd

ReleX · 29-09-2006, 18:29

The piston and cylinderhead was smashed during a meet. I have not had time to update for a while, but here are some

Regards

tph-x · 01-10-2006, 15:29

damn.. How about the cyl condition ?
Yes 10mm bolt is weak for rpm like that.
Nice video quality, and maby going with a high end cylinder next?

ReleX · 01-10-2006, 20:39

the cylinder survived

I ordered an XSH tuned evo+carted earlier today, will have the things by this or next week hopefully
regards

Mr.Aerox · 06-10-2006, 17:29

what is that red tube on your manifold? extra fuel??

Spasta · 06-10-2006, 17:32

Quote:

Originally Posted by Mr.Aerox

what is that red tube on your manifold? extra fuel??

vacuum for the fuel

mike66 · 06-10-2006, 17:44

you have aerox all the tme?fan vad min engelska suger angry chanels you got there a couple of rpm i think

Mr.Aerox · 06-10-2006, 20:31

well whats the balck tube on the manifold then?

ReleX · 07-10-2006, 02:02

the black one is for vacuum, the red one is going nowhere but to a screw that will lock the tube up so no air will get through

Zmod · 27-10-2006, 15:53

Sorry for making you're cylinder that powerful

. At least i know how far i can go on a 10mm pistonbolt now (A). Let's find out what 12mm pistonbolt can handle

. See ya!

ReleX · 23-11-2006, 22:56

hey dudes, polished the carter some days ago and making update now. I wanna se COMMENTS

Mr.Aerox · 24-11-2006, 08:38

wow....i want that

cantdrive55 · 24-11-2006, 15:26

I'm liking how you got every little crevice and crack nicely polished. I don't think I would have enough patience to do all that polishing...

Robbert. · 24-11-2006, 22:21

Very Nice!

Your bodywork is great also!

speed4fight · 01-12-2006, 17:37

Nice! Relex ;D

Jimmy · 02-12-2006, 05:00

Quote:

Originally Posted by ZipSjezer

very nice!

only the tuning of youre cilinder

hope this wil go fast! en tell us youre score, highest s6r score till now is 19.9 SAE

yeah who raped your cilinder?

now is 20.8 (correct me if i'm wrong) bij EPC (jerno)

but nice rox

Jan_Kaas · 02-12-2006, 11:31

That rox

ReleX · 02-12-2006, 11:32

Zmod did

But the pics were taken before I fixed the canals (first tuning) The canals were fixed radivcally after the second tuning. The cylinder is now sold by the way

I neved tested it but I figure it had a lot of power sine it broke the pistionbolt

Regards

Facilly · 02-12-2006, 14:03

Polish-slut

Plantje · 03-12-2006, 10:55

my old carter looks very nice davind

!!

Fast malaguti · 03-12-2006, 12:35

this is gonne crash youre cilinder its not verry good

**Dennis** · 03-12-2006, 13:51

That Cil

!

ReleX · 03-12-2006, 14:09

Well, i actually used that cylinder a pretty long time with that damage and it worked perfectly fine, but it sold now and I only have the evo left.
The stage6 was just a fun thing to try out so don't complain about the tuning

Thanks for comments

ReleX · 11-01-2007, 21:26

Update boys !

If any mod see this, can you change the topic to
"ReleX XSH Evolution Aerox"

Regards

*Racing Desing* · 16-01-2007, 15:38

nice scoot, keep up the good works

18-09-2006, 23:38	#31 (permalink)
cunoh Thoms Racing!	and wtf is this? Prins Claus tjoening? __________________ Website www.CunodeBruin.nl Powered by: Thoms Motoren, Silkolene, Fdeb Vastgoed, De IdentiteitsFabriek, Racesport 2009: 3e Stage6 PRO Cup

01-10-2006, 15:29	#38 (permalink)
tph-x Registered User	damn.. How about the cyl condition ? Yes 10mm bolt is weak for rpm like that. Nice video quality, and maby going with a high end cylinder next? __________________ Project 2007

06-10-2006, 17:44	#42 (permalink)
mike66 Registered User	fet! you have aerox all the tme?fan vad min engelska suger angry chanels you got there a couple of rpm i think

27-10-2006, 15:53	#45 (permalink)
Zmod Registered User	Sorry for making you're cylinder that powerful . At least i know how far i can go on a 10mm pistonbolt now (A). Let's find out what 12mm pistonbolt can handle . See ya! Last edited by Zmod; 27-10-2006 at 16:00.

02-12-2006, 14:03	#54 (permalink)
Facilly [NHO] M-tuning	Polish-slut __________________ Go East

19-09-2006, 18:10	#32 (permalink)
Mark Jonker Een Diesis??, jup	OMFG. that's after "tuning" ?.

25-09-2006, 20:03	#34 (permalink)
Wesley S. DE EMHAER BOY! My scooter: ScooterbaseID	Jeeez. what the.. your cil..

28-09-2006, 13:21	#36 (permalink)
Rik491 alles race	Beunerd

29-09-2006, 18:29	#37 (permalink)
ReleX Stage6 R - 10,34	The piston and cylinderhead was smashed during a meet. I have not had time to update for a while, but here are some Regards

01-10-2006, 20:39	#39 (permalink)
ReleX Stage6 R - 10,34	the cylinder survived I ordered an XSH tuned evo+carted earlier today, will have the things by this or next week hopefully regards

06-10-2006, 17:29	#40 (permalink)
Mr.Aerox mhr r0x!	what is that red tube on your manifold? extra fuel??

06-10-2006, 20:31	#43 (permalink)
Mr.Aerox mhr r0x!	well whats the balck tube on the manifold then?

07-10-2006, 02:02	#44 (permalink)
ReleX Stage6 R - 10,34	the black one is for vacuum, the red one is going nowhere but to a screw that will lock the tube up so no air will get through

23-11-2006, 22:56	#46 (permalink)
ReleX Stage6 R - 10,34	hey dudes, polished the carter some days ago and making update now. I wanna se COMMENTS

24-11-2006, 08:38	#47 (permalink)
Mr.Aerox mhr r0x!	wow....i want that

27-09-2006, 17:09	#35 (permalink)
RR#1 RR#1	Snyggt !

01-12-2006, 17:37	#50 (permalink)
speed4fight sweden!	Nice! Relex ;D

24-11-2006, 15:26	#48 (permalink)
cantdrive55 Registered User	I'm liking how you got every little crevice and crack nicely polished. I don't think I would have enough patience to do all that polishing...

24-11-2006, 22:21	#49 (permalink)
Robbert. Registered User My scooter: ScooterbaseID	Very Nice! Your bodywork is great also!

02-12-2006, 11:31	#52 (permalink)
Jan_Kaas Registered User	That rox

02-12-2006, 11:32	#53 (permalink)
ReleX Stage6 R - 10,34	Zmod did But the pics were taken before I fixed the canals (first tuning) The canals were fixed radivcally after the second tuning. The cylinder is now sold by the way I neved tested it but I figure it had a lot of power sine it broke the pistionbolt Regards

03-12-2006, 10:55	#55 (permalink)
Plantje Retired :P	my old carter looks very nice davind !! __________________ Hoi iedereen !

03-12-2006, 12:35	#56 (permalink)
Fast malaguti 100 % HD Tuning	this is gonne crash youre cilinder its not verry good __________________ 100 % HD TUNED <SBO scooter speciaal #124> 100% HD tuning

03-12-2006, 13:51	#57 (permalink)
Dennis ToetToet	That Cil !

03-12-2006, 14:09	#58 (permalink)
ReleX Stage6 R - 10,34	Well, i actually used that cylinder a pretty long time with that damage and it worked perfectly fine, but it sold now and I only have the evo left. The stage6 was just a fun thing to try out so don't complain about the tuning Thanks for comments

11-01-2007, 21:26	#59 (permalink)
ReleX Stage6 R - 10,34	Update boys ! If any mod see this, can you change the topic to "ReleX XSH Evolution Aerox" Regards

16-01-2007, 15:38	#60 (permalink)
Racing Desing Registered User	nice scoot, keep up the good works

LinkBacks (?) LinkBack to this Thread: http://forum.scooterforum.net/forum/f88/relex-xsh-evolution-aerox-125122/
Posted By	For	Type	Date
forum.scooter-tuning.sk • Zobrazenie tÃ©my - Obrazky tuning skutrov	This thread	Refback	05-11-2009 23:37