Aerox power problem. :/

m-iksu · 26-04-2008, 13:29

I have built my rox at last winter so now it's start to be ready, but i found some problem with power.
DON'T READ IF YOU HATE BAD ENGLISH

...

I have that kind problem with my rox, that first when i start it when it's cold it works realy nice power is okey and its take nice boost etc... But when it's take warm little bit like 1-2minuts power go totally down its wont go up to hill so good than cold and...

MY SETUP
-Polini Corsa 70cc
-Polini Speed Control (4grams roller)
-Polini Speed Drive
-Polini Speed Bell
-Polini Speed Clutch (Some red bigspring and red clutch springs, can it be go too light for time it's used)
-Yasuni C16
-Dellorto Racing 21mm (102 mainjets)
-Hebo Airfilter

Problem is that it wont work well at warm. What i need to try??? Changes somes springs or??
and sory my English skills

tiba_karotsu · 26-04-2008, 15:48

you say when rox cold power good but rox hot power no good?

rollers try light.

m-iksu · 26-04-2008, 16:22

Ok tomorrow i get littlebit lighter rollers so i will try it. Maybe thats can help me.

Big B NRG · 28-04-2008, 09:29

Your MainJet is way to big. Try something between 70~80.

I think your rollers are pretty good?

pug405 · 14-05-2008, 12:54

HI IM WONDERING IF ANYONE CAN HELP IVE MADE A GO CART FROM A 100CC AEROX BUT NOW THERE IS NO SPARK I HAVE NOT TOUCHED THE REAR END OR THE ENGINE JUST CUT THE FRONT OF THE BIKE OFF AND WELDED A CHASSIS UP SO I CANT UNDERSTAND Y THERES NO SPARK IT RAN FINE BEFORE (CDI UNIT?) ANY HELP OR INFO WILL HELP THANKS

DRXRACING · 14-05-2008, 16:15

Make sure your stator, cdi box , and coil is grounded properly.

26-04-2008, 13:29	#1 (permalink)
m-iksu Registered User	Aerox power problem. :/ I have built my rox at last winter so now it's start to be ready, but i found some problem with power. DON'T READ IF YOU HATE BAD ENGLISH ... I have that kind problem with my rox, that first when i start it when it's cold it works realy nice power is okey and its take nice boost etc... But when it's take warm little bit like 1-2minuts power go totally down its wont go up to hill so good than cold and... MY SETUP -Polini Corsa 70cc -Polini Speed Control (4grams roller) -Polini Speed Drive -Polini Speed Bell -Polini Speed Clutch (Some red bigspring and red clutch springs, can it be go too light for time it's used) -Yasuni C16 -Dellorto Racing 21mm (102 mainjets) -Hebo Airfilter Problem is that it wont work well at warm. What i need to try??? Changes somes springs or?? and sory my English skills

26-04-2008, 15:48	#2 (permalink)
tiba_karotsu OVERREV TUNING	you say when rox cold power good but rox hot power no good? rollers try light. __________________ 2stroke tuning the Dutch way + infusion with Filipino ingenuity = OveRReV TuNinG Rev Higher, Go Faster, Race Harder, My Desire

28-04-2008, 09:29	#4 (permalink)
Big B NRG Need tuning? PM!	Your MainJet is way to big. Try something between 70~80. I think your rollers are pretty good? __________________ BojT zegt: ik reken op je lul BojT zegt: uhh, ik reken op je! lul

14-05-2008, 12:54	#5 (permalink)
pug405 Registered User	AEROX NO SPARK HI IM WONDERING IF ANYONE CAN HELP IVE MADE A GO CART FROM A 100CC AEROX BUT NOW THERE IS NO SPARK I HAVE NOT TOUCHED THE REAR END OR THE ENGINE JUST CUT THE FRONT OF THE BIKE OFF AND WELDED A CHASSIS UP SO I CANT UNDERSTAND Y THERES NO SPARK IT RAN FINE BEFORE (CDI UNIT?) ANY HELP OR INFO WILL HELP THANKS

26-04-2008, 16:22	#3 (permalink)
m-iksu Registered User	Ok tomorrow i get littlebit lighter rollers so i will try it. Maybe thats can help me.

14-05-2008, 16:15	#6 (permalink)
DRXRACING wrhracing	Make sure your stator, cdi box , and coil is grounded properly.