CHT and water temp gauge .

DamboDink 70cc · 14-07-2008, 11:05

i have the koso CHT .
i didnt find any other display so i took this one :
http://cgi.ebay.co.uk/Swoosh-60mm-Fi...3286.m14.l1318
this is for water temp and it cames with water temp sender.

i connected all whe wires .the display work but i have a little problem .
the gauge shows that my engine runs at only 120 F after i push him to maximum .(50 C)
and whem im standing (after i pushed him to his limits) the display shows only 140 F .(60 C)

i know it can be possible that air cooled engine runs at 50 degrees C.
it should run atleast at 100 and even get to 120 degrees C .

what can i do about it ?
i did a mistake taking the CHT sender with water temp gauge ?

i looked for the resistense of both display and KOSO CHT sender .
i found that KOSO CHT sender its between 10 ohm to 180 ohm (if im not mistake ) . and i did find the water temp sender resistense .
(i hope that info will help u with the answer .

i also hope u understand what im saying .

thank u and have a nice day .

sbo#159 · 15-07-2008, 14:51

you should be at the english section

http://forum.scooterforum.net/forum/f94/

**$aint** · 16-07-2008, 20:46

Are you using the KOSO CHT sensor with the display you linked (at eBay)?

If so I guess they don't really match.

14-07-2008, 11:05	#1 (permalink)
DamboDink 70cc Registered User	CHT and water temp gauge . i have the koso CHT . i didnt find any other display so i took this one : http://cgi.ebay.co.uk/Swoosh-60mm-Fi...3286.m14.l1318 this is for water temp and it cames with water temp sender. i connected all whe wires .the display work but i have a little problem . the gauge shows that my engine runs at only 120 F after i push him to maximum .(50 C) and whem im standing (after i pushed him to his limits) the display shows only 140 F .(60 C) i know it can be possible that air cooled engine runs at 50 degrees C. it should run atleast at 100 and even get to 120 degrees C . what can i do about it ? i did a mistake taking the CHT sender with water temp gauge ? i looked for the resistense of both display and KOSO CHT sender . i found that KOSO CHT sender its between 10 ohm to 180 ohm (if im not mistake ) . and i did find the water temp sender resistense . (i hope that info will help u with the answer . i also hope u understand what im saying . thank u and have a nice day .

15-07-2008, 14:51	#2 (permalink)
sbo#159 .	you should be at the english section http://forum.scooterforum.net/forum/f94/ __________________ aeroxsjezer:me aerox verzuipt ik:moet je hem een snorkel om doen

16-07-2008, 20:46	#3 (permalink)
$aint holy scootertuning	Are you using the KOSO CHT sensor with the display you linked (at eBay)? If so I guess they don't really match. __________________ Goed hardrijden is een dure hobby...