Purejet Polini Fuel Pressure kit install

McScooterson · 24-08-2008, 19:12

\Hello,
I have a 2009 Piaggio style SR50 ditech.

I just installed a Polini Fuel Pressure kit, and now my bike won't start. I
can hear the fuel pump prime, and everything sounds correct, but the bike
is not firing. There is no fuel getting to the plug. I've tested this by
spraying starter fluid in the air intake.
All o-rings are seated properly, and fuel lines are connected correctly. I
don't see anything that is unplugged, or out of place.

**$aint** · 27-08-2008, 12:51

I don't know anything about Di-tech engines, but did you install everything like on this picture?

http://it.catalogo.polini.it/polini/...03_expmaxi.jpg

24-08-2008, 19:12	#1 (permalink)
McScooterson PSEUDO TUNING	Purejet Polini Fuel Pressure kit install \Hello, I have a 2009 Piaggio style SR50 ditech. I just installed a Polini Fuel Pressure kit, and now my bike won't start. I can hear the fuel pump prime, and everything sounds correct, but the bike is not firing. There is no fuel getting to the plug. I've tested this by spraying starter fluid in the air intake. All o-rings are seated properly, and fuel lines are connected correctly. I don't see anything that is unplugged, or out of place.

27-08-2008, 12:51	#2 (permalink)
$aint holy scootertuning	I don't know anything about Di-tech engines, but did you install everything like on this picture? http://it.catalogo.polini.it/polini/...03_expmaxi.jpg __________________ Goed hardrijden is een dure hobby...